pedrodelgado
1 µW
My controller died and so I bought a new one. Mostly works fine, but the pedal assist is very slow to respond - both starting and stopping pedalling. The start response is annoying, the stopping response is dangerous.
I have used several KT controllers (20A, 30A, 45A) with KT LCD3 displays and the pedal assist has worked great. They are silver, some of them bought from Hallomotor, others on ebay.
My new controller is a Risunmotor (35A, RM36/48S3M35AB, black) with a UKC1 display (UKC1-VS4.7). I can also run the controller with my LCD3 (battery display doesn't work but fine otherwise) - both displays have the slow pedal assist response. I have also tried a similar black RM controller with SW900 display and had same problem.
I've looked at the manual for the UKC1, but no mention of PAS settings. Any thoughts?
I have used several KT controllers (20A, 30A, 45A) with KT LCD3 displays and the pedal assist has worked great. They are silver, some of them bought from Hallomotor, others on ebay.
My new controller is a Risunmotor (35A, RM36/48S3M35AB, black) with a UKC1 display (UKC1-VS4.7). I can also run the controller with my LCD3 (battery display doesn't work but fine otherwise) - both displays have the slow pedal assist response. I have also tried a similar black RM controller with SW900 display and had same problem.
I've looked at the manual for the UKC1, but no mention of PAS settings. Any thoughts?