SamM
100 W
I'm getting prepared to buy a Schlumpf 2.5:1 High-Speed Drive for my Fighter. I think that it will be the best option for high speed petaling.
SamM
SamM
Rod's Raptor 140 Build
- Thread starter Rodney64
- Start date
Rodney64
100 kW
The phasor has a schumph drive but they're expensive. Happy with the current set up Alex. Have the 48 front and a 11/32 rear which is good for 35-40kph.
Rix
100 TW
SamM said:
Let me know how you like it. I went with shorter 160mm crank arms and 36t up front. It was quite noticable.
Rodney64
100 kW
Went to an area where we hadn't been before and it was quite flat. Not a good test. In the vid on the tar seal we were going around 40kph.
[youtube]uOMbYYLFDGo[/youtube]
[youtube]uOMbYYLFDGo[/youtube]
Rodney64
100 kW
Ive just put back on my original short stem. With the new seat and it also higher its starting to feel good and at the moment its close to Hughes fighter setup. http://endless-sphere.com/forums/memberlist.php?mode=viewprofile&u=35319
I have given the new throttle a good test (Left hand and I've decided to go back to a right hand thumb throttle. So ive just ordered a new left hand 7 speed gear shifter.
http://www.chainreactioncycles.com/au/en/shimano-altus-m310-7-speed-trigger-shifter/rp-prod55296
I have given the new throttle a good test (Left hand and I've decided to go back to a right hand thumb throttle. So ive just ordered a new left hand 7 speed gear shifter.
http://www.chainreactioncycles.com/au/en/shimano-altus-m310-7-speed-trigger-shifter/rp-prod55296
Rodney64
100 kW
SamM said:
Sam this drive is well worth it. With the Raptor Ive had the option to go to a 48 tooth on the front and with the rear 11-32 freewheel Im peddling at the speed that I need for commuting.
Rix
100 TW
Rodney64 said:Ive just put back on my original short stem. With the new seat and it also higher its starting to feel good and at the moment its close to Hughes fighter setup. http://endless-sphere.com/forums/memberlist.php?mode=viewprofile&u=35319
I have given the new throttle a good test (Left hand and I've decided to go back to a right hand thumb throttle. So ive just ordered a new left hand 7 speed gear shifter.
http://www.chainreactioncycles.com/au/en/shimano-altus-m310-7-speed-trigger-shifter/rp-prod55296
Thanks for posting the vid rod, with the terrain you are riding, you are going to like the 3.00-17 SR241s so much better than your knobbies. On asphalt it will role so much smoother, on the hard pack dirt, they will stick and roll smoother as well. Gonna feel like a whole new bike. So when will you have them in and on the machine?
Rodney64
100 kW
Maybe tomorrow Rick. Plan on using the bike to commute during the summer but I don't have a battery with the capacity though.
Rix
100 TW
Cant wait to see what they look like on, please post pics.
SamM
100 W
Thanks Rodney!
I may need to look into doing that before I replace my Schlumpf Speed Drive with the Schlumpf High Speed Drive. Not sure how much room there is. I'm fairly certain it will take a 5-speed gearset. Not sure about the 7-speed.
SamM
I may need to look into doing that before I replace my Schlumpf Speed Drive with the Schlumpf High Speed Drive. Not sure how much room there is. I'm fairly certain it will take a 5-speed gearset. Not sure about the 7-speed.
SamM
Rodney64
100 kW
Updated dashboard photo.
Allex
100 MW
Feels odd to see a photo of the stuff I had in my hands being on another continent now! 
Samd
10 MW
Let me know when you want me to send you some stuff then Allex
Hey Rodney, that dash looks the goods mate. Some good weather over your side of the continent Saturday and Sunday, I'm predicting a good weekend for riding
Hey Rodney, that dash looks the goods mate. Some good weather over your side of the continent Saturday and Sunday, I'm predicting a good weekend for riding
Rodney64
100 kW
Sand, I'll we wiring it up on the weekend. Soldering on new bullets and changing the current heat sensor for the adapto one. May even fit my shrinko tyre tithe rear when the wheels off.
Rodney64
100 kW
A couple of shots of my Raptor.
Ive have now run the rear brake cable though the battery compartment and also fitted a 4065 to the bike. Haven't tried out the top speed yet but without any effort was doing 65kms an hour. The adaptto controller is up and running and I'm enjoying its ease of use. One feature that I really like about it is the percentage of charge and distance empty.
I still need to fit my ignition key and I also have on order a left hand 7 speed shifter.
Ive have now run the rear brake cable though the battery compartment and also fitted a 4065 to the bike. Haven't tried out the top speed yet but without any effort was doing 65kms an hour. The adaptto controller is up and running and I'm enjoying its ease of use. One feature that I really like about it is the percentage of charge and distance empty.
I still need to fit my ignition key and I also have on order a left hand 7 speed shifter.
Rix
100 TW
Rodney64 said:A couple of shots of my Raptor.
Ive have now run the rear brake cable though the battery compartment and also fitted a 4065 to the bike. Haven't tried out the top speed yet but without any effort was doing 65kms an hour. The adaptto controller is up and running and I'm enjoying its ease of use. One feature that I really like about it is the percentage of charge and distance empty.
I still need to fit my ignition key and I also have on order a left hand 7 speed shifter.
I like your style Rod, you got the 17MC wheel option for offroad and super moto conditions, then the bicycle wheel option for commuting and summer time beach cruising. Very Nice. I cant recall, are you running the Raptor with Chris' 24s pack?
Rodney64
100 kW
Yes just changed over to the bicycle set up and it feels very good. Defently the way to go on road. I was going to swap over the 4080 into the 26 inch rim but decided to give the 4065 a go and not disappointed with it so far. Plenty of torque and top end speed. Rick currently running Chris' pack but only 18s. The adaptto will not run on 24s.
Allex
100 MW
24s is fine just charge it to 98Volts
pendragon8000
100 kW
Rod, you might want to check this stuff out.
http://www.jaycar.com.au/productView.asp?ID=WH5632&CATID=82&form=CAT2&SUBCATID=996#1
In Jaycar. I used some on my one of my bikes. It looks great. Over the motor wires. It opens up when you push on it like a cobra or something you could put it over your wires on without removing the plugs and tidy it up. also its a mesh so air still cools the phase wires.
http://www.jaycar.com.au/productView.asp?ID=WH5632&CATID=82&form=CAT2&SUBCATID=996#1
In Jaycar. I used some on my one of my bikes. It looks great. Over the motor wires. It opens up when you push on it like a cobra or something you could put it over your wires on without removing the plugs and tidy it up. also its a mesh so air still cools the phase wires.
Rix
100 TW
Rodney64 said:
Glad its working out great. You got the bush set up, and the road set up. I imagine you can change between the two in about 15 minutes tops. You have a bulk charger set up for 18s?
Rodney64
100 kW
Allex said:
Ill try charging to 98 volt on the weekend then Allex
pendragon8000 said:
Thanks, Ken ill give it a try on the weekend then. Still need to decide what I'm going to do with all the cables going though the frame where the ignition switch should be. Ill need to buy a new hole drill. destroyed it drill the cable hole at the back. This frames alloy its so dam hard its believable.
Rix said:
Yes commuted to work yesterday Rick 41 kilometres with the slicks it just rolled. Had a long look from a couple of your brothers as well Rick, I don't think they knew what they were looking at. Riding home last night at 9.30pm and 5kms from home and 32% of my battery left decided to gun it home. Just no noise these controllers, still night warm 22 degrees, just perfect for riding.
No bulk charger for 18S so its a slow process to charge. But I do have the adaptto charging coil and BMS but haven't connected it up yet. Ill give the 24S pack a try on the weekend and charge to 97 volt as Allex has suggested. This way I can bulk charge. Yes about 30 minutes at this stage Rick, Need to remove the freewheel and the rear disc.
Loving the adaptto with the 3 speed settings. Even on the economy mode with the slicks set on 25k an hour at times the bikes cruising at 30kph.
Rix
100 TW
Just a thought Rod, why don't you build a 22s pack out of your 24s? At around 92 volts HOC, it would be under the 98 volt limit of Adapto set up, and wouldn't cos you nothing to do it. Could have Chris adjust your bulk charger. You would have 92% of your voltage and with the Adapto OVS options, you could have a 120KPH 
machine with the 4080 on it.
machine with the 4080 on it.Rodney64
100 kW
I thought about this Rick. My 20c pack has puffed cells and I haven't any new ones. I've decided to buy a new pack from Jay 22s, 25 amp hour. Just a waiting game now until the packs are made and shipped.
The 4080 if you want speed would be better suited with the max-e. The mini.e is keeping a lot cooler with the 4065 and I haven't had any thermal roll back yet where the 4080 was on hills.
The 4080 if you want speed would be better suited with the max-e. The mini.e is keeping a lot cooler with the 4065 and I haven't had any thermal roll back yet where the 4080 was on hills.
Rix
100 TW
Rodney64 said:
Looks like my suggestion was already in the making. SWEET! I forgot you had the mini #. Still a kick a$$ controler. What can you pull for top speed with your OVS set at max on 18s and the 4065?
Rodney64
100 kW
Around 68kph with the 4065 and 78 with the 4080.
Similar threads
