twist throttle pin name

[juheon]

Hello~~
I'm writing for the first time.
I look forward to your kind cooperation.

I'm posting an inquiry.
This is twist throttle I bought from golden motor.
I'm trying to utilize 5 pin throttle.

I don't know the pin name, so I'm posting it here
I'm looking forward to hearing from the masters.
Thank you.

pin : green, black, brown, white, orange

 

[TommyCat]

Hi juheon,
And welcome to the forum!

I use a Golden Motor throttle with my Magic Pie V5. Specifically, a Wuxing 29 DX 48-volt AS023.

If you have some of the wire and colored insulation still attached to the cut off connector. You could match it to this pin-out diagram...

Note: V4 and V5 wiring is the same. Verified with my connector...

These pictures show the interior wiring of my throttle...

Which corresponds to my wiring notes on it, which are...

5vdc+ hall sensor supply is WHITE wire.
Hall signal wire is GREEN wire.
Battery ground wire is BLACK wire. (Used by both hall sensor and LED display...)
Full battery+ switched thru red push button is BROWN wire.
Full battery+ is ORANGE wire.


As always verify before you try. It's extremely important not to mix the high voltage battery supply and switched battery power, with the low voltage hall sensor wiring.

Look to this thread for more information on verifying your wiring, and how to get access to the interior of your throttle.

Guide to Hall Sensor Throttle operation, testing, and modification.

Any questions feel free to ask!



Regards,
T.C.

 

[juheon]

Thank you for your response.

Your reply was very helpful.

Have a nice day

Thank you.
.

 

[TommyCat]

You're welcome!