drewbob
100 µW
- Joined
- Dec 8, 2021
- Messages
- 9
Hi all - difficulties putting a 5 wire throttle on a citycoco scooter that had a 7 wire throttle.
The old broken throttle had a switch (not sure what it did), battery indicator, and the typical 3 wire throttle function.
switch: yellow/green
battery indicator: blue/brown
throttle: red/black/white
The new throttle has a two wire on/off key, voltage readout, and the typical throttle function.
on/off: yellow/blue
throttle: red/black/green
So I assume the throttle wires r/b/w would connect directly to the r/b/green of the new throttle. :thumb:
I would think I could just connect the old y/g to make the switch active in case that was an additional on/off button.
That leaves me with an EXCESS BLUE AND BROWN WIRE that I don't know where to connect.
in the photo, the old throttle is on the left side of the electric tape, connections for the new throttle are on the right side of the electric tape.
https://imgur.com/ipLs0CG
https://imgur.com/0GaDVzX
This scooter does have a security system and remote. I've pressed the unlock and then the lightning button twice. The alarm goes off at me when I press and hold the lock button to turn it off. Not sure if I'm doing something wrong with regard to the alarm too.
https://imgur.com/PLMWRka
The old broken throttle had a switch (not sure what it did), battery indicator, and the typical 3 wire throttle function.
switch: yellow/green
battery indicator: blue/brown
throttle: red/black/white
The new throttle has a two wire on/off key, voltage readout, and the typical throttle function.
on/off: yellow/blue
throttle: red/black/green
So I assume the throttle wires r/b/w would connect directly to the r/b/green of the new throttle. :thumb:
I would think I could just connect the old y/g to make the switch active in case that was an additional on/off button.
That leaves me with an EXCESS BLUE AND BROWN WIRE that I don't know where to connect.
in the photo, the old throttle is on the left side of the electric tape, connections for the new throttle are on the right side of the electric tape.
https://imgur.com/ipLs0CG
https://imgur.com/0GaDVzX
This scooter does have a security system and remote. I've pressed the unlock and then the lightning button twice. The alarm goes off at me when I press and hold the lock button to turn it off. Not sure if I'm doing something wrong with regard to the alarm too.
https://imgur.com/PLMWRka