sabvoton issues

Lowberry

10 mW
Joined
Jan 27, 2016
Messages
22
Location
redding CA.
hello have a sabvoton 9680 smc it runs backwards... need to program or??? the password to open software WTF.... had it sent by them months ago... cant find it now that I,m trying to make it work again.... emailed cherry but who knows when ill get reply... could someone pm me the password... I,m working on this today.... this would be a nice gesture..... any way to switch phase wires n hall to switch dir???? thanks in advance
 
See the ES wiki article, or the thread by the same name, for How to Determine the Wiring for Brushless Motor, for ways to swap direction with phase/halls.



Alternately you mgiht just see if the ocntorller has a "reverse" wire pair you can connect together.
 
The sabvoton controller has a reverse wire, but reverse direction is speed limited, so swap your phases and halls, or get the programming software and set it to reversed direction
 
quick post befoe I check wiki, and thanks for the response... note I did swap yellow and green pase and halls but it just shutterd, no spin.. hope this swapping can work
programming: the cd they send got snapped in half.. the download from google drive has bad files the error... anyone aware of some other place to download the software? oh what's up with the password for the software also. cherry gave it to me once several monthes ago but now it's not working for me recently
 
amberwolf said:
See the ES wiki article, or the thread by the same name, for How to Determine the Wiring for Brushless Motor, for ways to swap direction with phase/halls.



Alternately you mgiht just see if the ocntorller has a "reverse" wire pair you can connect together.




not sure where to find that article...
 
Very strange, that phrase should bring it up as that's the title of the thread, but it doesn't.

A slightly different search, just with Determine Brushless Motor does find it:
https://endless-sphere.com/forums/search.php?keywords=determine+brushless+motor&terms=all&author=&sc=1&sf=titleonly&sk=t&sd=d&sr=topics&st=0&ch=300&t=0&submit=Search

The wiki is linked in a couple threads at the top of every forum section, but this is the article
https://endless-sphere.com/w/index.php/Determining_the_Wiring_for_a_Brushless_Motor
 
Back
Top