No, you only can read the current data values.pxl666 said:... is it possible to read avg motor power and avg speed ?
mmbrusa would you find them usable and consider coding these ?Elinx said:No, you only can read the current data values.pxl666 said:... is it possible to read avg motor power and avg speed ?
First testautomobilklub said:... 48V 750W kit from pswpower. Will report the controller revision once delivered (if I figure out how to check that)...
Thanks for this confirmation.Anikea said:...two motors 36v 250W from PSW ........
..... it's still the old, programmable controller Version.
Can I measure it in the end of the extension which splits into the speed sensor and the lights?Elinx said:Until now there were only reports that PSWpower was still selling the old v1 controller.spycrash said:....
I bought it 1 year ago. ....
I'll check the voltage on the speed sensor connector. Any picture with which holes I must measure?
Checking the Version of the controller:
No, there are fewer connections inside that connector. It is also not possible to use this for flashingspycrash said:.....
Can I measure it in the end of the extension which splits into the speed sensor and the lights?....
automobilklub said:I have found my ktlcd3 on ebay. Never used but old.
Flashed fine.
Now I ve tried to flash v.20 and my Stlink seems dead... No lights, windows "discover" sound can be heard but stprogrammer does not connect with the motor or lcd. 5V output is present but on 3.3V line, only 2.02V.
Seems as I have bad luck with this conversion...
Ordered new stlink and waiting... Will update once received.
Thanks!
The one I ordered from PSPower arrived. It has 5V on the speed sensor pins so should be v1.paul67 said:Good to hear it's v1. So I've also just ordered one. I'll try to remember to update this thread with version info when I receive it
paul67 said:The one I ordered from PSPower arrived. It has 5V on the speed sensor pins so should be v1.paul67 said:Good to hear it's v1. So I've also just ordered one. I'll try to remember to update this thread with version info when I receive it
:thumb:paul67 said:.....
The one I ordered from PSPower arrived. It has 5V on the speed sensor pins so should be v1.
Matze_Senpai said:anyone here ever calibrated their torque sensor with vlcd5? if so please tell me how it works and how complex it is. :thumb:
Go to hidden menuMatze_Senpai said:...calibrated their torque sensor with vlcd5? ...