mirkoser100
10 mW
- Joined
- Jul 29, 2020
- Messages
- 31
From where you purchased the motor? Directly from Bafang?
Gesendet von iPhone mit Tapatalk
Gesendet von iPhone mit Tapatalk
mirkoser100 said:From where you purchased the motor? Directly from Bafang?
Gesendet von iPhone mit Tapatalk
Kyokushin said:Gents, could you tell something about battery/power consumption.
Is riding on M600 have similar range as to M500 or noticeable lower?
Animalector said:sure, but from a practical point-of-view, Level 1 for the M500 "DOES NOT EQUAL" level 1 on the M600.
Anyway, I have both, and on a normal enduro ride, on the same trails, I use more power on the M600.. Both are fun, and with both I am tired before i run out of juice.
Animalector said:mate it's a bit hard to say.... it depends on so many things, in particular how much you pedal.
with the M600, I go from 100% down to 35% after 25km pushing hard on the pedals. (enduro type single-track, tight, steep)
with the M500 on the same 25km track, pushing hard on the pedals, I end up with maybe 50 - 60% (but it is a slightly slower ride)
I very rarely ride on level 5, typically I ride Level 2 M600, and Level 3 M500... because I like to pedal.
Anyways.. it's hard to say.. just get one.. it'll be great
Kyokushin said:I difference noticeable?
Next question, do you know where i can buy the M500 wiring from the photo?
Or what kind of plug it is? I would like to buy the wiring or the plug.
tomjasz said:Kyokushin said:I difference noticeable?
Next question, do you know where i can buy the M500 wiring from the photo?
Or what kind of plug it is? I would like to buy the wiring or the plug.
Amass MR60
https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2510209.m570.l1313&_nkw=amass+mr60&_sacat=0
https://neumotors.cartloom.com/storefront/product/3-pin-mr60-connector
Power is just power and if you have two motors doing the same identical task but with one taking longer ( a slower ride ), then you will use less power unless the efficiency of the motors is way different. In the case of the M500 and M600 both must be pretty similar efficiencies as they use almost identical mechanical parts and same firmware developers, just a bit more copper in the stator.Animalector said:with the M600, I go from 100% down to 35% after 25km pushing hard on the pedals. (enduro type single-track, tight, steep)
with the M500 on the same 25km track, pushing hard on the pedals, I end up with maybe 50 - 60% (but it is a slightly slower ride)
ornias said:Can someone please upload the new CRX10NC4818i132046.8 firmware for testing please?
Hagbard said:Has anyone got this? Would love to hear some feedback on a newer M600 firmware version.
ornias said:Can someone please upload the new CRX10NC4818i132046.8 firmware for testing please?
Interesting that the overall levels have remained much the same.Afaixeda said:The power at 1/3 remains at 10A maintained with peaks of 12A, at level 2/3 13A with peaks of 14A, at level 3/3 18A maintained with peaks of 19/20A maximum. Same as 46.6 or 46.7
If anyone wants me to try another file, i'll volunteer
Thanks and regards
Kyokushin said:M600 max is 18Amps.
How you noiced the 20 amps peak?
On fully charged 48V battery the max out put shall not exceed the 983W (54.6Vx18A).