hi everyone! i am a new guy here and this is my first build ever. i 've been working on this project for several years but the building process has started just this year. i'm still learning every day i work on this bike. happily i have a friend who helps me with the building. saying frankly his crafting skills are unvaluable fro me.
so the design of this motorcycle was unabashedly stolen by me from this motorcycle:
as matt once said "imitation is the sincerest form of flattery" so i totally agree. i think this is one of the most beutifull motorcycles i've ever seen. at the same time i wanted the design to be relatively simple to implement in crafting. i also didn't have an experience with CAD programs. i've started learning and after many nights i've got this:
the motor is revolt rv-120 pro.
the controller is adaptto max-e.
the battery consisits of 22 pcs of these cells:
made in china, bought it in russia. no idea what is the chemistry of the cells. the sellers beleives it is limn2o4, my guess it is lipo. looks like nissan leaf cells.
i've also bought wheels, brakes, throttle, front fork, swingarm, shock, saddle and some other staff over the internet. some photos below:
the rims, tyres, brakes and fork were bought from taobao, china.
the swingarm is from old yamaha yrz125.
design of the frame:
frame made of 5mm sheet aluminium alloy. i think now it is too much but at the beginning i wanted my frame to be quite beefy. it is cutted from sheet by waterjet.
changed swingarm:
the battery set:
plan to make covers from fyberglass (at the picture there are right side covers only):
the chassis:
left-side look, no covers:
to be continued...
p.s. hope for your support, guys, because i need to do a lot of things.
so the design of this motorcycle was unabashedly stolen by me from this motorcycle:
as matt once said "imitation is the sincerest form of flattery" so i totally agree. i think this is one of the most beutifull motorcycles i've ever seen. at the same time i wanted the design to be relatively simple to implement in crafting. i also didn't have an experience with CAD programs. i've started learning and after many nights i've got this:
the motor is revolt rv-120 pro.
the controller is adaptto max-e.
the battery consisits of 22 pcs of these cells:
made in china, bought it in russia. no idea what is the chemistry of the cells. the sellers beleives it is limn2o4, my guess it is lipo. looks like nissan leaf cells.
i've also bought wheels, brakes, throttle, front fork, swingarm, shock, saddle and some other staff over the internet. some photos below:
the rims, tyres, brakes and fork were bought from taobao, china.
the swingarm is from old yamaha yrz125.
design of the frame:
frame made of 5mm sheet aluminium alloy. i think now it is too much but at the beginning i wanted my frame to be quite beefy. it is cutted from sheet by waterjet.
changed swingarm:
the battery set:
plan to make covers from fyberglass (at the picture there are right side covers only):
the chassis:
left-side look, no covers:
to be continued...
p.s. hope for your support, guys, because i need to do a lot of things.