The original firmware does:
Turn on the system. (wait about 3 sec).
When you tap the power button it toggles the lights on/off. Hold power to turn off system.
When lights are tapped ON:
Screen backlight = ON
lighting circuit has 6v applied, this circuit has two tails. Often used to power both front and back.
(Brakes do nothing).
Turn on the system. (wait about 3 sec).
When you tap the power button it toggles the lights on/off. Hold power to turn off system.
When lights are tapped ON:
Screen backlight = ON
lighting circuit has 6v applied, this circuit has two tails. Often used to power both front and back.
(Brakes do nothing).