Search results

Date Relevance Most replies

  1. C

    E-S Stealth Electric Bike Owners

    Any one know if its a H5580 or H55100? Motor Model H5580 Motor Speed 80km.hr / 72V Max. Torque Nm 88N.m / 710rpm / 72V 40A Voltage Range 48V ~ 96V Suggest Current Max. 60A Motor Weight 12kg Motor Model H55100 Motor Speed 100km.hr / 96V Max. Torque Nm 145N.m /...
  2. C

    E-S Stealth Electric Bike Owners

    Mr LB, looks like you have an older charger however mine is labled as NTC 5D-25. Prehaps 5D-15 was under rated.....
  3. C

    MXUS 3000 Hub Motor - V1 V2 V3

    My 12t freewheel is 1/8".
  4. C

    MXUS 3000 Hub Motor - V1 V2 V3

    Thanks Alex. Madin88, im no expert hence the call out. I have heard that when spokes touch it adds strength to wheel. It does this by spreading load accros 2 spokes oppesed a single one. Most bicycles do this including motorbikes. Exception are to Harley's when they use a 5mm spoke or straight...
  5. C

    MXUS 3000 Hub Motor - V1 V2 V3

    Is this the lace pattern from mxus? I have laced this way (spokes same direction) and found that 10g spokes touch just nice at spoke cross point. I have also laced alternating spokes on the motor hub and found a gap at the cross point. Now which is better or the properly way?
  6. C

    Spot Welding Copper Strips to 18650 Battery Cells

    You will find grinding Thoriated Tungsten is very toxic. If purchasing Tig tungsten eletordes to make your own, Green is pure Tungsten where other colours have other elements. It might be a good idea to find out what tungsten electrode colour / type Sunstone use for copper.
  7. C

    18650 spot welding -how to- ULTIMATE REPOSITORY

    The thick heatshrink is also known as double wall. Failing the heavy heat shrink, any sources for thin fibreglass for battery boxing using pvc heatshrink? "Answered my own question" G10 FR4 Epoxy Glass Fiberglass Sheet
  8. C

    E-S Stealth Electric Bike Owners

    Sounds like time to do local group buys and bulk order on cells. Im in on Samsung 30Q
  9. C

    E-S Stealth Electric Bike Owners

    All thanks to those cheap self balancing hoverboard for the bad reputation placed on lithuim cells. Ironicly laptops are ok......
  10. C

    Stealth FUTR owners builds and pics

    Is that a 20s pack on the bench to fit into the beta?
  11. C

    INR18650HG2 3000mAh 20A

    Also known as LGDBHG21865 Chemistry: Li(NiCoMn)O2 Max Continuous discharge current: 20A Max discharge current: 35A Weight: 47g
  12. C

    INR18650HG2 3000mAh 20A

    New kid on the block with 3000mAh capacity @ 20A discharge. Any one got more details on this. It also looks like LG's rival Samsung should not be far off with its 3000mAh equivalent based on chemistry and capacity. It looks probable to be an improvement on the 2500mAh INR chem and the rest...
  13. C

    welding 18650 cells with DN-5 spot welder

    Has anyone tried to spot weld with copper strips with DN 10 or 5? 0.3 0.4 or 0.5mm copper should weld easier than nickel and considering the low settings being used to work on with nickel, copper should take more current? Im not sure what the obsession with nickel is when copper is less...
  14. C

    E-S Stealth Electric Bike Owners

    Will, had the same problem and found it to be the jst connector for the throttle. I took out the battery, foam mat and tape holding the loom down. Dis connected and reconnected the connector then re assembled. Good as gold. I dont think your settings would be your issue.
  15. C

    E-S Stealth Electric Bike Owners

    Check your regen wire connections. Usally can come loose at the jst plug or broken wiring behind the regen button.
  16. C

    E-S Stealth Electric Bike Owners

    The wheel looks very good. I had resvations with 11/12g spokes however it looks strong enough and It also helps keep the weight down. Keep in mind that the hub and rim is not always perfectly round and your spokes may not be cut exactly the same. As long as you did not run out of thread to...
  17. C

    E-S Stealth Electric Bike Owners

    It would be nice to see a off the shelf rim built to suit Our bikes. Im hoping MMP might be the answer? There has been hardcore atempts get this right see dlogic's video and thread. He does mention that has a 19 inch lace up perfectly and so do SM Pro Platinum...
  18. C

    E-S Stealth Electric Bike Owners

  19. C

    E-S Stealth Electric Bike Owners

    I would not try to remove case unless you really have to. Its is hard to remove the 4 screws but once its done, be careful with the flex ribbion cable and detaching. You will be able to simply swap the guts over. If you insist on removing the whole lot, warm the face of the CA first to soften...
  20. C

    E-S Stealth Electric Bike Owners

    Ok, evoloution looks some like this HS3548 HT4065 HS4065 XX40XX Custom HS4080 On the fighter with a stock 26 inch rim and battery, i known the top speed with a HS3548 is 50km. Prehaps everyone can report there experiences to slove this mystery. If your hitting 70km, you probably have HS4080...
  21. C

    E-S Stealth Electric Bike Owners

    Rix did you upgrade your Fighter to 4080 as the sock is a 4065? As a lord of the RIMs, have you or some one pysicaly tried these two motors? There must be some trade offs between the 2 and would love to hear more experiences out there. Its been said the 4080 is more efficiciant at higher...
  22. C

    E-S Stealth Electric Bike Owners

    If your thinking of re powder coating then your powder coater can strip your frame for you. Powder coating is usually removed chemically and all powder coating services usually have this facility for when power coating does not go to plan. You can buy strippers if you want to DIY, however...
  23. C

    E-S Stealth Electric Bike Owners

    What happen to freegopower 136*120*350mm 22S 20AH LiNiCoMn.? What are the specs and price on 22s from Vipower? I can find it on www.vipower.biz
  24. C

    E-S Stealth Electric Bike Owners

    CA is a not bad piece of work and ver 3 has some nice features which the older stealth's are probably not a custom to. I'm just about to add Bluetooth connectivity to mine for about $10 and 4 wires to the CA. An app already exists, check out the following thread...
  25. C

    Hyena's e-bike builds (now with HD video)

    Looks like these should fit. Available as straight pulls @ http://holmeshobbies.com/Holmes-Custom-Moped-Spokes.html Max spoke length 245mm Min spoke length 65mm Nipple body is 6mm diameter, nipple head is 9.44mm diameter Nipple length is 16mm Nipple uses 5mm wrench Spoke diameter at Hub...
Back
Top