Maybe better wait, because mstrans wrote that can be more problems now. I want to test litlle bit longer, because if sth is wrong I can easily repair (but after first ride its working fine).
new tsdz8 pswpower
- Thread starter pxl666
- Start date
Thanks, I can test your osf on my own risk
I put on github a new version 0.1.3 of OSF for TSDZ8.
This version does not use the XLS anymore but a java configurator (nearly identical to the TSDZ2 configurator) that is in my github.
I also tried to include the latest changes made by mbrusa in OSF for TSDZ2.
Read the readme section to see changes (mainly how to generate the configuration and location of hex files to upload).
Do not use the XLS anymore. I will delete it because it is not compatible.
This version does not use the XLS anymore but a java configurator (nearly identical to the TSDZ2 configurator) that is in my github.
I also tried to include the latest changes made by mbrusa in OSF for TSDZ2.
Read the readme section to see changes (mainly how to generate the configuration and location of hex files to upload).
Do not use the XLS anymore. I will delete it because it is not compatible.
Great job.
Last edited:
2.Generate the configuration file
There configuration file is generated with the same tool as TSDZ2: javaconfigurator.jar. To know how to use this tool and the purpose of all parameters, see the TSDZ2 manual at https://github.com/emmebrusa/TSDZ2-...meter_configurator_guide-TSDZ2-v20.1C.2-2.pdf Note: it could be that the TSDZ2 manual is not 100% up to date (the configurator contains perhaps a few more fields).Gitbub link says:
404 - page not found
Thanks for the comment.
Mbrusa updated his site 2 weeks ago.
You can find different document here:
TSDZ2-Smart-EBike-1/manuals at master · emmebrusa/TSDZ2-Smart-EBike-1
TSDZ2 Open Source Firmware adapted to VLCD5-VLCD6-XH18 displays - emmebrusa/TSDZ2-Smart-EBike-1
github.com
jped277
10 mW
how do i open the java configurator? when i click the configurator.jar file it opens in notepad. i cant seem to get it to open in any other program? what am i missing?
Last edited:
I have nearly no experience with java but I think you have to install java jdk (it is said in the TSDZ2 manual). There is no need to install the other software (because they are for TSDZ2 compilation and llashing) . Once java sdk installed, you can use e.g. the windows file explorer. Double clicking on the .jar file should then open the configurator gui. At least this works on my side (with windows 10). Perhaps there are other users on this forrum that have more experience with java (e.g. if they already used the TSDZ2 configurator version in the past)
jped277
10 mW
can someone help me with this? i've installed java jdk and when i select open with java on the config.jar file it flashes a black box and nothing happens.
Are you on windows? In my case I open the windows file explorer and I just dubbel click on the file with the .jar extension.
But selecting OPEN or dubbel click should be the same.
I read once more the TSDZ2 doc and it said that you have to install java "environment". No idea if this is the same/included in the java sdk?
jped277
10 mW
i have downloaded the whole git hub file and unzipped where it was. also i've donloaded java but not whatever java environment is. yes i'm on windows 10.
jped277
10 mW
this is all i get when i double click the configurator.jar
jped277
10 mW
now i get this when i try to launch the configurator.
jped277
10 mW
It keeps saying could not parse launch file, error at line 1
jped277
10 mW
Also if any of you are interested I built a shunt resistor into my bike today and checked the tsdz8 just to see how much power it's drawing. Setting on the stand holding the brake medium hard and full throttle with stock firmware it drew about 20amps at 50ish volts. Meter said over 1000watts. So we have a starting point to go from. I didn't want to set the power too high but if it's already at 1000watts or more I bet we are safe to push it to 1200 or so.
jped277
10 mW
ok i've got some new info. it says possibly the config.jar file was compiled with an older version of java? what version are you using? and also i just tried to open the old tsdz2 configurator.jar and it opens just fine.
jped277
10 mW
holy shit. i downloaded the older version of java and it worked right away!!!!!
jped277
10 mW
omg ok so i flashed the new osf firmware to my motor. and i flashed the config.hex. it says my battery is at 1 bar. i'm using the vlcd5. and i get no throttle or pedal assist. motor doesnt work at all. what did i do wrong?
i used the configurator and set battery amps and all what i thought was correct. then flashed the newest firmware version from msrens github. and then flashed the config.hex file from files to flash on the downloaded git hub file on my pc. dont understand why i'm getting no power at motor. it works fine with the original firmware.
i used the configurator and set battery amps and all what i thought was correct. then flashed the newest firmware version from msrens github. and then flashed the config.hex file from files to flash on the downloaded git hub file on my pc. dont understand why i'm getting no power at motor. it works fine with the original firmware.
Last edited:
What version you installed?holy shit. i downloaded the older version of java and it worked right away!!!!!
In my windows 10 laptop happens as you. When I went to Java website and click check java version it opened uninstall java.
jped277
10 mW
I started with the newest Java download and update 8. Then rolled back to the 21 version of their website and it worked. But still no motion out of the motor. I dont know if I did something wrong while flashing or if my configuration settings are wrong.
Thank you. I will try that. I haven't yet Segger clone so I can't test software on motor.
did you checked if the configuration hex file has been updated by the configurator. The date and time should have changed when you run the configurator and ask for compile & flash.
