Votol EM-100 & EM-150 controllers
- Thread starter Stefanj.
- Start date
Looking forward to hearing from you, with my homemade Bluetooth module, It works partially with the first blue app in the picture, of course most fields are not adjustable, but the monitor screen works very well, you can try itWhen I tested earlier, electric braking (high brake used) was happening.
Currently I am away from that system, so can't 100% guarantee that regen brake is turned on, but the behavior as mentioned above leads me to believe it is on.
One of my tire is punctured, I mean a fracture in the leg, so can't test it soon. Hope to test it & give feedback at a later point of time after recovery.
BTW, are there any Votol app available from Vino?, I had earlier used fishblood's app available in this thread, but it was difficult to use in my setup.
Attachments
You can try the old and new versions of this software at ECU program Votol Vino download
can you show me how to connect the controller to that app, it cant detect my hc05 module
Anyone can say the name of the Bluetooth app? I don't find it in wechat
Anyone can say the name of the Bluetooth app? I don't find it in wechat
认证主体
个人开发者账号原始ID
gh_a636a3904e02AppID
wx2dea5e1b573149cd
I use hc05 and the password is 1234, only read permission, not write permission.
afzal
100 W
I don't wechat, how can i try this app?, not seeing in Google playstore
Please create an account, it is not available on chplay or apk
afzal
100 W
It is banned here (India)
Kirill
100 W
- Joined
- Dec 10, 2019
- Messages
- 118
I've been trying to set up the EM50-4 for a few days. CAN version.
The controller has been working very strangely for the last two days.
Yesterday I could easily change the RPM speed.
Then, at some point, the RPM limit is activated.
I don't know how. I didn't specifically include anything that could limit the RPM.
But after that, no matter what RPM value I choose, the RPM on the display always shows no more than 600.
What is the problem I couldn't solve. Today I started trying to figure it out again.
It turned out that Speed ratio (%) is active and unchecked in the Speed limited enable window.
Although yesterday I freely changed RPM and the checkbox was unchecked. And I did not change the value 37 there.
Today, without checking the box, I simply changed the Speed ratio (%) value and this strange limitation disappeared. The motor spun as much as I wanted.
But literally after a few minutes of further adjustment, the RPM limiter became active again.
A one more thing I can't check the Speed ratio (%) box because the gear indicator and gear shifting disappear.
Ini file here. Config1711.ini
Thank you!
The controller has been working very strangely for the last two days.
Yesterday I could easily change the RPM speed.
Then, at some point, the RPM limit is activated.
I don't know how. I didn't specifically include anything that could limit the RPM.
But after that, no matter what RPM value I choose, the RPM on the display always shows no more than 600.
What is the problem I couldn't solve. Today I started trying to figure it out again.
It turned out that Speed ratio (%) is active and unchecked in the Speed limited enable window.
Although yesterday I freely changed RPM and the checkbox was unchecked. And I did not change the value 37 there.
Today, without checking the box, I simply changed the Speed ratio (%) value and this strange limitation disappeared. The motor spun as much as I wanted.
But literally after a few minutes of further adjustment, the RPM limiter became active again.
A one more thing I can't check the Speed ratio (%) box because the gear indicator and gear shifting disappear.
Ini file here. Config1711.ini
Thank you!
Attachments
no. sigo buscando
gustavo88py
10 mW
I have 150sp1 180
How do I make the copy to share?
Thanks to the reference, but I not able to find it...
justviewer
1 µW
Good evening everyone,
Could I get firmware .bin for EM-100 please? Got burned STM, replacing with blank one... Would be much appreciated!
boonexpert@gmail.com
anas974
100 µW
Bonjour les amies
J'habite en montagne, j'aimerais avoir plus de couple et de puissance pour rouler en montagne sans griller le contrôleur mdr
Y at-il une possibilité de faire évoluer le paramétrage de l'em150 ? Svp
Batterie supportée 220v max
Actuellement je monte une côte de 11% de dénivelé sur 4km à 90kmh
Pièces jointes
J'habite en montagne, j'aimerais avoir plus de couple et de puissance pour rouler en montagne sans griller le contrôleur mdr
Y at-il une possibilité de faire évoluer le paramétrage de l'em150 ? Svp
Batterie supportée 220v max
Actuellement je monte une côte de 11% de dénivelé sur 4km à 90kmh
Pièces jointes
Attachments
what hub are you using? how many kw? and temp after your climb?Bonjour les amies
J'habite en montagne, j'aimerais avoir plus de couple et de puissance pour rouler en montagne sans griller le contrôleur mdr
Y at-il une possibilité de faire évoluer le paramétrage de l'em150 ? Svp
Batterie supportée 220v max
Actuellement je monte une côte de 11% de dénivelé sur 4km à 90kmh
Pièces jointes
