dameri said:
AZUR said:
Hi all,
I would like to share with the Forum what I did on the TSDZ2 engine to improve heat dissipation.
Part 3
3 - Lubricate the engine with a grease suitable for nylon Blue Gear.
I lubricated with a grease that is used to lubricate the nylon gears in the wind turbines. I used the Molykote PG-65 grease.
I applied Molykote both on Blue Gear and internally on the bearings as well as on all metal gears.
The engine was running much quieter.
Below are some pictures.
Nice work and pictures. Where did you buy Molykote PG-65 grease?
edit: I heard Molykote PG-54 plastilip grease could be fine.
Hi Dameri,
Thank you for your words.
I bought the Moly 65 in Portugal.
In Belgium, on the website, www.klium.com, you can buy, 1kg, for € 58.2 plus shipping costs (€ 20 for Portugal)).
They also have the PG-54 but it costs € 140.6 KG.
I sent the photos of the Blu gear and the engine to Molykote and the European technicians advised me on the PG 65.
As I said before, it is used in Nylon gears, in wind turbines.
I am not a grease specialist.
But what I found out the PG-65 has an NLGI Grade = 1 and it seems to me that it is better than the PG 54 which has an NLI Grade = 2-3.
If you check the grease that comes on the engine, on Blue Gear, when you buy it, it should have an NLGI = 1.
Regards