James Broadhurst
100 W
To the guy who said boost wasn’t necessary with v20.0-beta.1 because you could use Emtb mode to gain very high initial power, you’re correct but not for a woman, or at least my wife who is totally sold on boost! Please can we have it back and restore harmony?!
Fantastic job and well done to all who contributed to this.
I have been recording WHr consumption rates since 2018 and used a coulomb-meter as well as the OS software to calculate the data. Ignoring the challenging stuff and only analysing the urban power consumption, the rate is between 7 & 8 WHr/mile. That’s recorded over 1,500 miles and two different bikes and both operated at assist x1.0 The v20 torque values for 10kg on each pedal are both 15.5+/-0.1.
At the risk of making myself look like a complete idiot, v20 is giving an extraordinary 5 WHr/mile. There is one problem with this bike which is that the SOC is about a volt higher than actual but can’t see that effecting things.
Fantastic job and well done to all who contributed to this.
I have been recording WHr consumption rates since 2018 and used a coulomb-meter as well as the OS software to calculate the data. Ignoring the challenging stuff and only analysing the urban power consumption, the rate is between 7 & 8 WHr/mile. That’s recorded over 1,500 miles and two different bikes and both operated at assist x1.0 The v20 torque values for 10kg on each pedal are both 15.5+/-0.1.
At the risk of making myself look like a complete idiot, v20 is giving an extraordinary 5 WHr/mile. There is one problem with this bike which is that the SOC is about a volt higher than actual but can’t see that effecting things.