-
Hello ES! We could use some help to get us past the finish line on building the new knowledgebase for the forum.
Can you donate? Please see our fundraising page. Thank you!
VESC for Bafang M560
- Thread starter TPEHAK
- Start date
- Status
TPEHAK
Regular
But that's truth. If the truth is not what you want it to be go ahead and be mad.
Does it make someone mad? Probably.
Is it a trademark infringement? No.
Does it make someone mad? Probably.
Is it a trademark infringement? No.
Last edited:
competitions
Established
Unfortunately you do need to move this topic off public viewing as you have communicated with Vedder and you have an auditable trail that now formally involves you and the forum owner.
Yep, it will be altered or removed from view during the weekend.
Nix Liou
Regular
TPEHAK
Regular
There is no product, there is no service and there is no company, therefore it is not a trademark infringement.
Read the Wikipedia and the definitions carefully. But better read the original law.
ivannnivano2000
New here
It's a shame that misunderstandings lead to the closure of the best projects!
TPEHAK
Regular
TPEHAK
Regular
It looks like the thread survived the last weekend! I recommend you to use this opportunity to download the new archive with the files. I added the new firmware with throttle calibrated for full stroke and removed regenerative braking (the default Luna firmware on this controller activates regenerative braking when throttle is below the middle position because of there is no voltage on the pin PB0 because of the circuit connected to this pin is for torque sensor now. With default Luna firmware it acts like partially engaged regenerative brake). This firmware is throttle only.
[ trademark infringing archive removed ]
[ trademark infringing archive removed ]
Last edited by a moderator:
Waynemarlow
Regular
Downloaded, thanks.
TPEHAK
Regular
Sorry, there are thousands of tutorials out there, how to use github. I'll give some last hints, but I will not explain any little click
As written, first fork benjamins projekt to you own account:
View attachment 380686
Then you will have a copy of the project as a repository in your own account.
click on the green button to download the project as a zip compressed archive, or use an app like Github Desktop on your PC to clone the repo to your local drive.
CubeMX has an implemented Git Plugin also.
View attachment 380688
After importing the project to CubeMX like described, you will be able to edit, compile and flash the firmware directly from CubeMX by a STLink. You have to compile with the M600 hardware configuration, see step 6 of my notes.
Don't forget to commit your changes to your fork at github, so the community can benefit from your work!
View attachment 380690
You mean STM32CubeIDE, not CubeMX?
So I forked the "bldc" folder (or project?) to my github account. Then I downloaded that "bldc" folder zip file to my computer. Then I unpacked that zip folder.
Then I downloaded the STM32CubeIDE v1.8.0 application following this
Then I installed the the STM32CubeIDE v1.8.0 application following this
Then I imported the "bldc-master" folder as project from that "bldc" folder from GitHub through "Import project" function in STM32CubeIDE application.
Then I try to set the hardware as "Luna M600" in the "conf_general.h" file following this instruction but there is no Luna word at all
I also attempted to follow the instructions you linked but the STM32CubeIDE shows just empty window after I do "4. file-->new-->Makefile project with existing code"
Last edited:
A-DamW
Regular
There is a Luna folder inside the hwconf folder, the .c and .h files to edit/compile are in there.
The instructions to compile are fairly clear on GitHub - vedderb/bldc: The VESC motor control firmware
I was able to compile using the instructions there.
Last edited:
TPEHAK
Regular
But it does no tell anything about STM32CubeIDE program. Can I use STM32CubeIDE program?
If I browse to the "bldc-master-->hwconfig-->luna-->m600" folder and click the hammer icon to build the firmware it gives me an error message "Program "make" not found in PATH"
If I browse to the "bldc-master-->hwconfig-->luna-->m600" folder and click the hammer icon to build the firmware it gives me an error message "Program "make" not found in PATH"
stancecoke
Minor legend
Sure, see the window title in the screenshots.
The hardware version to compile has to be set in the project properties:
https://github.com/stancecoke/VESC_.../documentation/Setup Cube IDE for VESC.txt#L6
Just run "make" from the command line, to see, which choices are possible. If I remember right it's "luna_m600" for the Luna M600
Last edited:
I've been slammed at the shop for too many days in a row and i don't have the energy.
VESC & co have not put expectations of timelines on things.
Please carry on until further notice.
TPEHAK
Regular
OK guys, we better hurry up with firmware since the forum administration gives us such generous opportunity!
But I think the issue is over, mxleming joined the effort and teamed up with us, so now we are officially VESC Labs!
But I think the issue is over, mxleming joined the effort and teamed up with us, so now we are officially VESC Labs!
It's pretty strange if this was true because i was told today to take the content down asap.
You are lying and showing that you have malicious intent toward this website and an open source project we rely on.
I will not argue with you more since you are uncooperative and uninterested in solving the legal problem you created for us.
I have censored the thread, unfortunately.
Further problems of this nature may result in a ban.
Last edited:
- Status
Similar threads
